Publicidad
Idiomas disponibles
Idiomas disponibles
English
•
After cleaning the appliance, dry it completely. Fill the tanks with water
until water comes out of the hot water valve, then connect the applian-
ce to electrical power.
•
If the hot water tank begins to build up water deposits, the heating
capacity will decrease. Fill the hot water tank with a 2% citric acid solu-
tion and let stand for 2 hours and then clean it. If the problems cannot
be solved, contact your nearest service center or distribution center.
Condenser Cleaning
Condenser Cleaning
Unplug the appliance from electrical power before cleaning. The static
condenser (in the back of the equipment) must be cleaned at least every
12 months for optimal performance. Use a soft brush to remove excess
powder to improve heat transfer to the environment.
Energy Saving Tips
Energy Saving Tips
•
DO NOT UNPLUG THE APPLIANCE AT NIGHT. Reconnecting the
next day will increase power consumption.
•
The appliance must be located in the coolest area of the room, away
from heat sources and out of direct sunlight.
•
Make sure the appliance is adequately ventilated. Never cover vents
or louvers.
Página 26 de 27
Publicidad
