Audio Signal Connections - Marantz professional CDR633 Guia Del Usuario

D
ERASE button
Performs the same function as the front panel
F
ERASE/DEL button (
E
RECORD button
Performs the same function as the front panel
(record)/TR.INCR. button (
F
SYNC REC button
Performs the same function as the front panel
K
SYNC REC/< button (
G
REC MUTE button
Records approximately four seconds of silence.
After the silence is recorded, the CDR633 will
enter record-ready mode (→ p.31).
H
SEARCH , buttons
Search through the disc forward (
ward ( ).
I
SKIP , buttons
Perform the same function as turning the front
panel MULTI JOG dial (
J
STOP button
Performs the same function as the front panel
G
(stop) button ( ).
K
PAUSE button
Performs the same function as the front panel
I
(pause) button ( ).
L
PLAY button
Performs the same function as the front panel
H
(play) button ( ).
2 – Front and rear panel—Audio signal connections
).
J
).
).
) or back-
A
).

Audio signal connections

Input
Only the input jack(s) selected by the front panel
6
INPUT SELECT ( ) button will be used.
Choose one of the following three sets of input jacks,
and make the appropriate connections.
• ANALOG IN (UNBALANCED) jacks L/R (
• DIGITAL IN (COAXIAL) jack (
• DIGITAL IN (OPTICAL) jack (
The display indicates the currently selected input
jack(s) (→ p.25).
Output
Signals are output from all of the following three sets
of output jacks. Connect the desired set(s) of output
jacks.
• ANALOG OUT (UNBALANCED) jacks L/R
N
( )
• DIGITAL OUT (COAXIAL) jack (
• DIGITAL OUT (OPTICAL) jack (
11
M
)
O
)
P
)
O
)
P
)