Basic Operation In Menu Mode - Marantz professional CDR633 Guia Del Usuario

Basic operation in Menu mode

This section explains how to select items in Menu
mode. You can perform these operations either from
the front panel or the remote control unit.
If using the front panel
1
Press the MENU button to enter Menu
mode.
You will switch from normal mode (in which you
perform normal playback and recording) to Menu
mode, and the display will show the menu items.
2
Turn the MULTI JOG dial to select a menu
item.
3
Press the MULTI JOG dial.
This will confirm your selection, and you will
now be able to edit the menu item.
For details on how to operate each menu item,
refer to the page given in the "Menu structure"
table.
4
To return from Menu mode to normal mode,
press the MENU button or the ENTER but-
ton.
The menu item you were editing will be finalized,
and you will return to normal mode.
Note
• To reset all the settings and return to the factory set-
ting, use the DEFAULT menu option.It should only be
used when a disc is not loaded.
• When IR REMOTE is set to Disable, some functicns
can not be operated using the remote control.On the
other hand, set to Enable allows any operation using
the remote control.
3 – Menu mode operations—Basic operation in Menu mode
If using the remote control unit
1, 4 2, 3, 4
1
2
3
4
13
Press the MENU button to enter Menu
mode.
You will switch from normal mode to Menu
mode, and the display will show the menu items.
Use the SKIP buttons to select a menu item.
Press the ENTER button.
This will confirm your selection, and you will
now be able to edit the menu item.
For details on how to operate each menu item,
refer to the page given in the "Menu structure"
table (→ p.12).
To return from Menu mode to normal mode,
press the MENU button or the ENTER but-
ton.
The menu item you were editing will be finalized,
and you will return to normal mode.
1, 4
3, 4
2