Midea MDF24P1BST Manual Del Usuario página 36

DISHES ARE DAMAGED DURING A CYCLE
PROBLEM
Dishes are chipped
NOTE: Some types of
china and glassware
might be too delicate
for automatic dish
washing. Wash by
hand.
ERROR CODES
CODE
Express light flashes
and dishwasher
beeps for 30
seconds
Normal g i l t h
flashes and
dishwasher beeps
for 30 seconds
Heavy, Normal and
Express lights
flash and
dishwasher beeps
for 15 seconds
36
POSSIBLE CAUSE
Dishes not loaded
properly.
Moving the rack
in or out of the
dishwasher too
quickly.
MEANING POSSIBLE CAUSE
Either the water
• Faucet is not opened
flow is insufficient,
• Water pressure is too low
or the water
• The drain hose is plugged.
pressure from the
• Other (parts failure of inlet or
incoming line is
drain system).
too high
Overflow or leak
• A leak
sensor activated
• Too much water in the
tub
Communication The display board can't receive
exception or issue or h t e
signal for over 20 seconds
SOLUTION
Load the dishes and
glasses so they are
stable and will not strike
together from washing
action.
Minimize chipping by
moving the rack in and
out slowly.
m a n i b a o d r c n a t ' e s n d a
POSSIBLE SOLUTION
• Make sure that the water is turned on
to the dishwasher.
• Make sure that the water pressure is
20~100 psi.
• Check the drain hose.
• Contact Customer Service.
Turn off water to the dishwasher,
then check the filter system for
blockage. Unblock if necessary.
If there is no water in the tub, contact
Customer Service
Contact Customer Service.