Publicidad
Idiomas disponibles
Idiomas disponibles
Translation of the original instructions
• These Class A devices are not intended to be used on a residential site where
the electric current is supplied by the public network, with a low voltage power
supply. There may be potential diffi-culties in ensuring electromagnetic compati-
bility on these sites, because of the interferences, as well as radio frequencies.
Maintenance:
• If the power cable is damaged, it must be replaced by the manufacturer, its after
sales service or an equally qualified person to prevent danger.
•Service should be performed by a qualified person.
• Warning! Always disconnect from the mains before performing maintenance
on the device. High Voltage and Currents inside the machine.
• Remove the casing on a regular basis, to remove any excess dust. Take this op-
portunity to have the electrical connections checked by a qualified person, with
an insulated tool.
• Do not use solvents or any agressive cleaning products.
• Clean the device's surfaces with a dry cloth.
Regulations:
• Device complies with europeans directives.
• The certificate of compliance is available on our website.
• EAC Conformity marking (Eurasian Economic Community).
• Equipment in compliance with British requirements. The British Declaration of
Conformity is available on our website (see home page).
• Equipment in conformity with Moroccan standards.
• The declaration C( مCMIM) of conformity is available on our website (see cover
page).
Waste management:
• This product should be disposed of at an appropriate recycling facility. Do not
throw away in a domestic bin.
DESCRIPTION
The Powerduction 10R has been designed to heat ferrous metallic elements by induction heating. Its main purpose is the
unjamming of parts such as bolts or exhaust pipes.
Carry cas econtents:
Le Powerduction 10R is supplied in a carry case that contains t(see fig.1) :
- the generator and its inductor cable , 1 ,
- 10 coiled wired, diameter 18 mm / 21 mm / 24 mm / 27 mm / 30 mm SIDE & FRONT 2 ,
- a flexible braided wire 3 ,
- a straight rigid wire 4 .
Fig.1
POWERDUCTION 10R
EN
11
Publicidad
