Sony BRAVIA FW-65BZ30J Guía De Referencia página 12

Monitor settings
When using [IP control], set the Monitor as follows first.
Go to [Settings] t [Network & Internet] t [Home network setup] t [IP control].
For REST API and IRCC-IP,
• Select [Authentication].
• Set [Pre-Shared Key] if needed.
For Simple IP control,
• Enable [Simple IP control].
Example of HTTP request and response for REST API
Here is the example of a request and response to acquire the power status to the Monitor (IP address:
192.168.0.1 Pre-shared Key "1234").
URL
http://192.168.0.1/sony/system
Request
POST /sony/system HTTP/1.1
Host: 192.168.0.1
Content-Type: application/json; charset=UTF-8
Content-Length: 70
X-Auth-PSK: 1234
{"method": "getPowerStatus", "params": [], "id": 50, "version": "1.0"}
Response
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
Content-Length: 44
{"result": [{"status": "active"}], "id": 50}
For more details on [IP control], please contact your sales representative.
12
GB