Publicidad
Idiomas disponibles
Idiomas disponibles
place that is inaccessible to children. Keep away from
corrosive agents such as garden chemicals and de-
icing salts.
■
Do not store outdoors.
■
When transporting the product in a vehicle, secure it
against movement or falling to prevent injury to persons
or damage to the product.
■
Never carry or transport the product while the engine
is running.
■
Abide by all government and local regulations for the
safety storage and handling of petrol.
SHORT TERM (LESS THAN ONE MONTH)
■
Stop the engine, and allow it to cool before storing.
■
Clean all foreign material from the product.
■
Cover the blade with the blade protector.
■
Store the product in a cool dry and well-ventilated place
that is inaccessible to children.
■
Keep away from corrosive agents such as garden
chemicals and de-icing salts.
■
Do not store outdoors.
FOR ASSEMBLING WITH ELECTRIC-DRIVEN POWER
HEAD
■
Stop the machine, disconnect from the power supply
and wind the cable. Allow machine to cool before
storing or transporting
■
Clean all foreign material from the product. Store it in a
cool dry and well-ventilated place that is inaccessible
to children. Keep away from corrosive agents such
as garden chemicals and de-icing salts. Do not store
outdoors.
■
Cover the blade with the blade protector
■
For transportation, secure the machine against
movement or falling to prevent injury to persons or
damage to the machine.
MAINTENANCE
WARNING
Use only original manufacturer's replacement parts,
accessories and attachments. Failure to do so can
cause possible injury, poor performance and may void
your warranty.
WARNING
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. For service we suggest you return the
product to your nearest authorised service centre for
repair. When servicing, use only identical replacement
parts.
■
Switch off, disconnect from the power supply (if
applicable), and make sure all moving parts have come
to stop before conducting any maintenance or cleaning
work.
4
| English
■
You may make adjustments and repairs described
here. For other repairs, contact the authorized service
agent.
■
After each use, clean the product with a soft dry cloth.
■
Check all nuts, bolts and screws at frequent intervals
for proper tightness to ensure the product is in safe
working condition. Any part that is damaged should be
properly repaired or replaced by an authorised service
centre.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
■
Contact with cutting means. Ensure that the blade
protectors are fitted when the product is not in use.
Keep hands and feet away from the blades at all times.
■
Injury caused by vibration. Always use the right tool for
the job, use designated handles and restrict working
time and exposure.
■
Hearing injury caused by exposure to noise. Wear
hearing protection and limit exposure.
■
Eye injury due to flying debris. Wear eye protection at
all times.
■
Kickback can occur when using the brushcutter. Ensure
proper control by using both hands on the designated
handles. Read and follow the directions in this manual
to help reduce the risk of kickback.
■
Risk of falling objects. Wear head protection if there is
any risk of falling objects.
RISK REDUCTION
It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
numbness and blanching of the fi ngers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices are
all thought to contribute to the development of the these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
■
Keep your body warm in cold weather. When operating
the unit wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■
After each period of operation, exercise to increase
blood circulation.
■
Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor about
these symptoms.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
Publicidad
