Publicidad
Idiomas disponibles
Idiomas disponibles
W IRING CON N ECTI ON
• Make the connection between the cables of your home's electrical installation and the ca-
bles of the fan motor following the following instructions.
Take ground
L
N
M OUN TI N G TH E CE I LI NG ROSE
• Lift the canopy onto the mounting bracket
and align the loosened screws on the mount-
ing bracket with the holes in the canopy.
• Turn the finial to adjust it. Reinsert the
screws and secure them with a screwdriver.
• Once you have the mounting bracket se-
cured to the junction box you can proceed to
hang the fan.
• Grip the fan firmly with both hands. Pass the
bar through the opening in the mounting bracket and allow the ball to rest on the mounting
bracket.
• Rotate the ball coupling until it lines up with the tab on the mounting bracket.
Advice: Another person should help you hold the ladder and reach you the fan once you have
climbed on it.
B L ADE AS SE MB LY
• Attach the blade hitch to the blade by screwing it in with the hitch screws.
• Once the blade attachments have been placed on all the blades, align the holes in the blade
support with the holes in the motor body and screw them into place, but do not tighten the
screws until they are all in place and screwed together.
Ground (green/yellow)
Light L
L engine
Neutral N
E NGLI SH
11
Publicidad
