Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Action
1 Plug the travel
charger into
your phone with
the release tab
facing up. Be
sure to insert
the plug's
connector hooks
straight into the
phone's charger slots, so that both hooks
engage to lock the plug in place.
2 Plug the other end of the travel charger into the
appropriate electrical outlet.
3 When your phone indicates Charge Complete, press
the release tab and remove the travel charger.
Note: Upon insertion of the charger plug into the handset,
the handset will respond with an indication that the battery
is charging (Battery Icon Flashing and/or Battery Indication
Tone). If the battery has been deeply discharged or stored
in a discharged state for an extended period of time, there
may be a delay of up to 10 seconds before the Battery Icon
and/or Battery Tone is activated. This is normal operation
and does not indicate a fault.
Tip: You can safely leave the travel charger connected to
the phone after charging is complete. This will not damage
the battery.
Release
Tab
11
Publicidad
