Fellowes Array AW2 Manual página 3

PRODUCT SPECIFICATIONS
Dimensions
Weight of System
Power Requirements
Watts (5 fan speeds)
PACKAGING CONTENTS
• Air Purifier (1)
• 2-in-1 Hybrid Filter (2)
• Pre-Filter (2)
• Keys for Locking Front Panel (2)
DISPLAY PANEL
1
NOTE: after the unit is turned on the "AQ" light will flash for a few minutes while the system self-calibrates.
1 HEPA FILTER –
Press for 2s: reset the life counter of the HEPA filter.
Light (red): indicates filter life has reached 100%.
2
CARBON FILTER –
Press for 2s: reset the life counter of the carbon filter.
Light (red): indicates filter life has reached 100%.
3
WIRELESS STATUS/RESET –
GREEN = Fully Connected & Paired
YELLOW = Connection Available
RED = Not Connected
RED (Blink) = Connection Error
BLUE = Reset Initialized
BLUE (Blink) = Reset Confirmed
OFF = Connection Disabled
AIR QUALITY INDICATOR –
4
GREEN: sensors calibrating
BLUE: air quality Good
AMBER: air quality Fair
RED: air quality Poor
WHITE: door open
PURPLE: unit ping from cloud
19.5 X 34.8 X 9.5 in 495 X 884 X 241 mm
35.0 lbs
AC 120V 60Hz 2.5A
200W
2 3
Press for 10s: connection reset.
15.9
• Registration information
• Quick Start Guide
• User Manual
4 5 6
5
QUIET –
Press: sets the unit to Quiet Mode.
Light: indicates unit is running in Quiet mode, where air quality sensor set fan speed
automatically depending on environment with a max of fan speed 3.
6 AUTO –
Press: sets the unit to Auto mode.
Light: indicates unit is running in Auto mode where air quality sensors set fan speed
automatically depending on environment.
7
MANUAL –
Press: cycle through fan speeds, a beep will be heard. If coming from
Auto mode, will start at lowest fan speed.
Light: indicates fan speed is being controlled manually.
8 MANUAL INDICATORS –
selected in manual mode (1-5).
7 8
Light: indicates which fan speed is currently
3