Fellowes Array AW2 Manual página 4

SCREEN CONTROLS
Screen
Name
Air Index
AQI/Machine Status
• Blue (Clean)
• Amber (Cleaning)
Functions
• Red (Cleaning)
Air Index Sensor Readings
• Colors on next page
Options
Go to 'Metric Detail' Page
Button
Screen Button Go to 'Filter Information' Page Go to 'Filter Information' Page Go to 'Screen Brightness' Page Go to "Turn Screen OFF" Page
FILTER CHANGE PROCEDURE
Unit will notify you when filter needs to be changed with a red light visible on the control panel. Always wear a mask and gloves when performing a filter change.
For replacement filters, please visit www.fellowes.com
1
Unlock access panel: to unlock, insert the key
provided and rotate counter-clockwise ¼ turn.
FILTER RESET
When installing a new filter, the unit will automatically detect the filter type but the user will have to manually reset the filter
replacement indicators with the following procedure:
Touch and hold the illuminated indicator
for two seconds until a beep is heard
and the indicator turns OFF.
4
Home Metric Detail
Air Index
Sensor Readings
o 91-100 • Blue
o Ideal
81-90 • Amber
o Acceptable
0-80 • Red
o Raised Levels
Go to 'Home' Page
2
Open front access panel by pressing latches on both
sides of unit. Allow panel to open fully. Remove
filter(s) to be replaced.
Filter Information Screen Brightness
Filter Identification
Filter Life Remaining
• Blue
o 100-11%
Current Screen Brightness
• Amber
o 1-10%
• Red
o 0%
Replacement Filter Numbers
Toggle 'Front Page
Adjust Screen Brightness
Notification'
Turn Screen OFF
Turn OFF Screen Option
Turn OFF Screen
Go to 'Home' Page
3
Remove any packaging wrap from the new filters(s)
and re-install the filters.