Publicidad
Idiomas disponibles
Idiomas disponibles
ES
EN
FR
IT
Remote + Cable
Remote + Cable
Wrench #16 and #17
Wrench #16 and #17
Instruction manual
Instruction manual
4.2. ASSEMBLY PROCESS
STEP 1:
STEP 1: Lift the frame and align the holes. Fix the M10x75 hex bolt
Lift the frame and align the holes. Fix the M10x75 hex bolt
as shown in the picture and fix the nut correctly (make sure that the
as shown in the picture and fix the nut correctly (make sure that the
frame does not move).
frame does not move).
1 - Hexagonal screw M10x75
1 - Hexagonal screw M10x75
2 - Washer
2 - Washer
3 - Nylon lock nut M10
3 - Nylon lock nut M10
4 - Nut cap
4 - Nut cap
STEP 2:
STEP 2: Insert the lift arm into the upper slot of the frame. Make sure
Insert the lift arm into the upper slot of the frame. Make sure
the holes are aligned, then fasten the M10x60 hex screw as shown
the holes are aligned, then fasten the M10x60 hex screw as shown
in the picture on the right and fix the nut cover (no movement is
in the picture on the right and fix the nut cover (no movement is
allowed on the lift arm).
allowed on the lift arm).
1 - Hexagonal screw M10x60
1 - Hexagonal screw M10x60
2 - Washer
2 - Washer
3 - Nylon lock nut M10
3 - Nylon lock nut M10
4 - Nut cap
4 - Nut cap
STEP 3:
STEP 3: Align the holes and fix the actuator. Hook in the M10x60
Align the holes and fix the actuator. Hook in the M10x60
hexagonal screw as shown in the drawings and fix the nut cover
hexagonal screw as shown in the drawings and fix the nut cover
correctly.
correctly.
1 - Hexagonal screw M10x60
1 - Hexagonal screw M10x60
2 - Washer
2 - Washer
3 - Nylon lock nut M10
3 - Nylon lock nut M10
4 - Nut cap
4 - Nut cap
DE
PT NL
SWE
PL DK
1 set
1 set
1 set
1 set
1 piece
1 piece
Electric Patient Lift
FORTUNA BASIC
2
4
3
1
13
Publicidad
