ES
EN
FR
IT
5.3. EMERGENCY STOP BUTTON
The emergency stop button is used to switch the power on and off. It
The emergency stop button is used to switch the power on and off. It
allows the motor to stop running immediately in case of danger.
allows the motor to stop running immediately in case of danger.
Switching off: Press the red button (see picture A), the control device is
Switching off: Press the red button (see picture A), the control device is
suspended.
suspended.
Switching on: Turn the red button clockwise (see picture B) and the
Switching on: Turn the red button clockwise (see picture B) and the
control device is activated.
control device is activated.
5.4. CONNECTION OF THE CONTROL DEVICE
Plug the power cable, the actuator plug and also the plug for the
Plug the power cable, the actuator plug and also the plug for the
handle control into the control box as shown in the figure on the
handle control into the control box as shown in the figure on the
right).
right).
5.5. REAR WHEEL LOCKING AND UNLOCKING
The rear wheels can be locked to prevent them from moving. Use your foot to lock and unlock the rear
The rear wheels can be locked to prevent them from moving. Use your foot to lock and unlock the rear
wheels.
wheels.
Caution: It is not necessary to lock the rear wheels for most lifting and lowering movements. We suggest
Caution: It is not necessary to lock the rear wheels for most lifting and lowering movements. We suggest
only locking the wheels when the lift moves and may cause personal injury.
only locking the wheels when the lift moves and may cause personal injury.
WARNING
WARNING
Blocking the actual wheels of the crane increases the risk of tipping during the lifting and lowering
Blocking the actual wheels of the crane increases the risk of tipping during the lifting and lowering
movement.
movement.
DE
PT NL
SWE
PL DK
UNLOCK
LOCK
Electric Patient Lift
FORTUNA BASIC
15