AfG Berlin 74EGTT Esquema De Instalación página 21

REMINDERS FOR CLEANING
The manufacturer will not be liable for any damage or
injury resulting from failure to observe the following
rules.
•
Disconnect the appliance electrical power supply, if
present, before proceeding with any operation.
•
Clean the satin finish stainless steel exterior surfaces,
the cooking wells and the surface of the hotplates
every day.
•
At least twice a year, have an authorized technician
clean the internal parts of the appliance.
•
Do not use direct or high pressure water jets or steam
cleaners to clean the appliance.
•
Do not use corrosive products to clean the floor or shelf
beneath the appliance.
•
Clean the ceramic glass hob regularly, preferably after
each use. Do not use abrasive sponges or abrasive
22
Instructions for cleaning
•
SATIN FINISH STAINLESS STEEL SURFACES
•
•
•
•
detergents. Also avoid aggressive chemical products,
such as oven clea-ning sprays, stain removers, and
also bathroom or universal cleaners.
If the hot ceramic glass hob comes into contact with
plastic, aluminum foil, sugar or sugary foods, it must
be cleaned at once. If these substances melt, they can
damage the surface.
Clean the surfaces with a cloth or sponge using water
and proprietary non-abrasive detergents. Follow the
grain of the satin finish. Rinse repeatedly and dry
thoroughly.
Do not use pan scourers or other iron items.
Do not use chemical products containing chlorine.
Do not use sharp objects which might scratch and
damage the surfaces.