Nespresso VERTUO POP Manual Del Usuario página 12

Plug the power cord in, remove the cup support and place
3
an empty container (of at least 1 L / 34 fl oz) under the coffee
outlet.
Open and close the machine. Ensure the lever is in lock
4
position.
i
The light will blink while the machine is heating up. It will take
approximately 30 seconds. When the light becomes steady the
machine is ready. Make sure that no capsule is inserted.
Press the button 3 times within 2 seconds to start rinsing.
5
Let the rinsing procedure complete automatically. When the
light becomes steady white, the cycle is complete.
i
It should take less than 2 minutes before the rinsing process begins
and water starts to flow. This procedure may take up to 7 minutes.
FIRST STEPS – PAGE 2/2
3x <2s
EN . 11