KSIX BXLED02 Manual De Usuario página 2

Safety note: Don't modify the product or exchange any
parts. Do not cover the product once it is installed and
connected to the power. Do not install the product on top of
high-heat objects or in a wet place.
1.4 How to cut the neon strip
To perform this task,
disconnect
from the power supply
and with the help of a
pair of scissors, make a
cut in the
marked on the strip.
Note: once the strip has
been cut, it cannot be
used again.
2. Initial settings
2.1 Download the app
The SmartLED Neon Strip compatible app is called Tuya
Smart. There are two ways to download it:
-Tap here to download the Tuya Smart app from Google Play
or App Store.
-You can also download the app directly by typing "Tuya
Smart" in the Google Play or App Store search engine.
2.2 Pairing iOS / Android devices
To complete the pairing, the strip must be properly installed
and powered on.
1. First, and most importantly, make sure to have your
smartphone's Bluetooth and WiFi enabled.
2. Set the strip on pairing mode. To do so, turn on-off-on-off-
off until the light is blinking rapidly. Please, complete the
network districution within 3 minutes after resetting the
device.
3. Access the Tuya Smart
app. Once inside, tap on
add device.
the strip
guides
4. If you have set the strip
on pairing mode properly,
it will pop up for you to
add it.