Publicidad
Idiomas disponibles
Idiomas disponibles
• Some dust created by power sanding, sawing,
grinding, drilling and other construction activities
contains chemicals known to cause cancer, birth
defects or other reproductive harm.
Inhaling hazardous dust can cause injury.
Power tools can cause flying particles during use.
• Wear safety goggles, user and bystanders.
Flying particles can cause injury.
Power tools generate noise.
• Wear hearing protection, user and bystanders.
Prolonged exposure to noise can cause hearing loss.
Power tools vibrate.
• Avoid prolonged exposure to vibration, repetitive
motions and uncomfortable positions.
• Stop using the tool if discomfort, tingling feeling or pain
occurs. Seek medical advice before resuming use.
• Do not use the tool if it vibrates too much, makes
unusual noises, has loose parts, or shows any other
signs of damage.
• If the tool malfunctions, discontinue use and
immediately arrange for service and repair.
Prolonged exposure to vibration, repetitive motions
and uncomfortable positions can cause injury.
Sudden changes in motion or position can occur while
using the tool.
• Anticipate and be alert for changes in motion during
start up and operation.
• Maintain a secure grip.
• Anticipate reaction force. Adjust your stance and hold
tool securely.
Sudden changes in motion or position can cause
injury.
Risk of entanglement.
• Keep body parts away from rotating parts.
• Wear protective hair covering to contain long hair.
• Keep handle dry, clean and free from oil and grease.
• Do not lock or tape the trigger in the ON position.
• Remove battery pack before changing accessories.
Entanglement can cause injury.
Using damaged or incorrect belts.
• Do not use chipped, cracked or damaged belts.
• Use belts rated at tool RPM (product specific) or higher.
• Securely tighten belt before operating the tool.
Flying particles can cause injury.
ZCTBF8818CE Rev. B
Avoid contact with the belts.
• Keep body parts away from the belts.
• Handle the sharp edges of the belts with care.
• Remove the belt from the tool before cleaning or
sharpening.
Contacting the sharp edge of the belt can cause injury.
Battery Pack Safety
Messages
Risk of explosion or fire.
• Do not store the tool and battery in locations where the
temperature may reach or exceed 120°F (49°C).
• CTC131/CTCA131/CTCEU131/CTCJ131 charger will
not charge battery when temperature is below 32°F
(0°C) or above 113°F (45°C).
• Do not incinerate the battery, even if severely damaged
or completely exhausted. The battery may explode in
fire.
• Cover the battery pack terminals with heavy adhesive
tape after removing the battery pack.
• Do not attempt to destroy or disassemble the battery
pack or remove any of its components.
• Do not charge battery pack using an engine generator
or DC power source.
• Charge battery pack in a well ventilated area.
Explosion or flames can cause injury.
Risk of electric shock.
• Do not disassemble the battery.
• Do not short circuit the battery.
• Charge battery pack only with Snap-on brand chargers
for specified battery packs.
• Disconnect battery pack when not in use, before
servicing and when changing accessories.
• Do not charge battery pack using an engine generator
or DC power source.
Electric shock or fire can cause injury.
Risk of burn.
• Battery leakage may occur under conditions of extreme
usage or temperature.
• Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
4
(01/21)
Publicidad
