Bosch GWS 27-230 PR Professional Manual Original página 24

24 | English
Intended use
The power tool is intended for cutting and brushing metal,
stone materials, plastic and composite materials, roughing
metal as well as making holes in stone materials using dia-
mond annular cutters, without the use of water. Make sure
that the correct protective guard is used (see "Operation",
page 27).
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind stone materials
with diamond grinding heads, to grind metal and stone with
grinding heads, or to work on composite materials.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Spindle lock button
(2) Vibration damping
(3) On/off switch
(4) Standard auxiliary handle (insulated gripping sur-
a)
face)
(5) Two-pin spanner for clamping nut
(6) Protective guard for grinding with clamping lever
(7) Coding cam
(8) Clamping lever for protective guard
(9) Adjusting screw for protective guard
(10) Mounting flange with O‑ring
Technical Data
Angle Grinder
Article number
Rated power input
A)
Rated no-load speed
Max. grinding disc diameter
Grinding spindle thread
Max. thread length of grinding
spindle
Soft start
Restart protection
KickBack Control
Rotatable auxiliary handle
PROtection switch
B)C)
Weight
1 609 92A 8TU | (02.05.2024)
(11) Grinding disc
(12) Disc brush (dia. 22.22 mm)
(13) Disc brush (M14)
(14) Clamping nut
(15) Quick-clamping nut
(16) Protective guard for cutting
(17) Cutting disc
(18) Handle (insulated gripping surface)
(19) Grinding spindle
(20) Diamond cutting disc
(21) Extraction guard for cutting with a cutting guide
(22) Hand guard
(23) Rubber sanding pad
(24) Sanding sheet
(25) Round nut
(26) Cup brush
(27) Cover for cutting
(28) Open-ended spanner
(29) Conical brush
(30) Diamond annular cutter
(31) Low-vibration auxiliary handle (insulated gripping
surface)
(32) Locking screw for protective guard
(33) Protective guard for grinding with locking screw
(34) Protective guard for cutting with locking screw
(35) Extraction guard for cutting with a cutting guide
a) This accessory is not part of the standard scope of delivery.
GWS 27-180 PR GWS 27-230 PR GWS 27-180 JR GWS 27-230 JR
3 601 HC6 1.. 3 601 HC7 1..
W 2700
–1
min 8500
mm 180
M 14
mm 25
●
●
●
●
●
kg 6.1–7.2
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
3 601 HC6 3..
2700 2700
6500 8500
230 180
M 14 M 14
25 25
● ●
● ●
● ●
● ●
● –
6.3–7.7 6.1–7.2
Bosch Power Tools
a)
a)
3 601 HC7 3..
2700
6500
230
M 14
25
●
●
●
●
–
6.3–7.7