Rockford Fosgate MARINE M400-4D Instalación Y Funcionamiento página 10

S
PECIFICATIONS
MODEL- MARINE
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts*
4ΩLoad Per Channel
2ΩLoad Per Channel
4ΩLoad Bridged
Dimensions:
Battery Fuse Rating (Amp) External (Not Supplied)
"A" Weighted Signal to Noise Ratio (CEA-2006)
Referenced to 1 Watt into 4 ohms
"A" Weighted Signal to Noise Ratio
Referenced to rated power into 4 ohms
Crossover Slope
Crossover Frequency
Frequency Response
Signal Voltage Adjustment Range
Protection
Punch EQ
Input Impedance
Operating Voltage
Balanced Inputs
Damping Factor
THD+N (Total Harmonic Distortion + Noise)
* These specifications are CEA-2006 Compliant
10
Height
Width
Length
Specifications subject to change without notice
M400-4D M600-4D
75 Watts x 4 100 Watts x 4
100 Watts x 4 150 Watts x 4
200 Watts x 2 300 Watts x 2
1.97" (5.00cm) 1.97" (5.00cm)
6.77" (17.20cm) 6.77" (17.20cm)
9.10" (23.10cm) 11.06" (28.10cm)
40A 60A
≥70 dB
≥90 dB
12dB/octave Butterworth
Variable from 50Hz to 250Hz
20Hz to 20kHz ±1dB
Variable from 100mV to 8V (RCA Input)
Short circuit protection shut downs the amplifier in
case of very low impedance or shorted speaker wires.
Variable from 0dB to +18dB @ 45Hz
20K ohms
9 to 16 Volts DC
>200
< 1.0% @ 4 ohm
No