KitchenAid KSB755 Manual De Instrucciones página 13

4. To turn off the CRUSH ICE feature
press OFF. The Blender is now ready for
continuous operation.
5. Before removing the pitcher or accessory
jar assembly, unplug the power cord.
PULSE MODE
Your KitchenAid Blender offers PULSE
®
MODE, which allows a "Pulse-at-any
Speed" feature.
NOTE: PULSE MODE will not work with
the CRUSH ICE feature.
1. Before operating the Blender, make
sure the pitcher or accessory jar
assembly is properly positioned on the
Blender base.
NOTE: If a gap exists between the
locking collar and the base, the pitcher
or accessory jar might not be locked
into the locking collar or the collar is not
positioned properly on the Blender base.
See Blender Assembly on page 8 for
further instructions.
2. Put ingredients into pitcher or
accessory jar, and firmly attach lid.
3. Press PULSE MODE. The indicator light on
the button will blink to indicate that all
five speeds are in the PULSE MODE.
4. Select a speed button. Press and hold
for the desired length of time. Both
the speed button and PULSE MODE
indicators will stay lit when pulsing
at the selected speed. When button
is released, the blending will stop,
but the Blender will remain in PULSE
MODE and the PULSE MODE indicator
will return to blinking. To pulse again
or at another speed, simply press and
hold the button of the desired speed.
Using the Blender
5. To turn off the PULSE MODE feature,
6. Before removing the pitcher or
Ingredient Cup
The 2 oz. (60 ml)
ingredient cup can be
used to measure and add
ingredients to both the
pitcher and the accessory jar. Remove cup
and add ingredients at STIR, CHOP or MIX
speeds. When operating at higher speeds,
with a full pitcher or with hot contents,
stop the Blender and then add ingredients.
Drizzle Cap (Model KSB755)
This versatile cap fits into
both the pitcher and
accessory jar lid and is
used to drizzle oils or
other liquids while the
blender is in operation.
Soft Start
The Soft Start
automatically starts the Blender at a slower
speed to pull ingredients into the blade
then quickly increases to selected speed
setting for optimal performance.
NOTE: The Soft Start
only works when a speed is selected from
the OFF mode and does not work with the
PULSE MODE or CRUSH ICE features.
11
press OFF. The Blender is now ready for
continuous operation.
accessory jar assembly, unplug the
power cord.
Blending Feature
®
blending feature
®
blending feature
®