Publicidad
Idiomas disponibles
Idiomas disponibles
DHW (if enable)
MONDAY - FRIDAY
1
2
3
08:00
10:00
12:00
CO
CO
CO
2.3.1
Automatic preset program change
1. Press the button
to enter in program menu.
2. Press buttons
and to move from HEATING to COOL-
ING or DOMESTIC HOT WATER.
3. Press the button
to confirm and start changing.
Note: when the program is changed the device displays first
the time band 1 of day 1. Use buttons and to select one
of the 6 time bands, use the button
of the week.
4. Press the button to move between starting time, tem-
perature set and time bands.
5. Press buttons
and
ments of 10 minutes.
6. Press the button to change temperature set.
7. Press buttons
and
increments of 0,1°C. In the case of DHW programming,
is possible to change from ECONOMY (EC) e COMFORT
(CO).
8. Press the button to go back to time bands.
9. Press buttons and to move to the next/previous time
band (the selected time band is followed by the arrow).
10. Wait 60 seconds to exit or press any other button.
4
5
6
14:00
18:00
23:00
CO
CO
CO
to change the days
to change start time by incre-
to change the temperature by
After having set the program for one day of the week, it is
possible to copy it on the next days:
11. Use button
to select the day of the week to copy.
12. Press button
to copy the settings of the selected day of
the week to the next day.
2.4 Special Functions
2.4.1
Holiday function
Is used to switch off heating or cooling (the deactivation of
the domestic hot water depends on the type of controlled
unit connected) from 1 hour to 45 days, adjustable in steps
of 1 hour. At the end of the function the previous settings are
activated. If the room temperature decrease below 5°C, the
heating is automatically switched on again for the Antifreeze
function.
Activation and setting of Holiday function:
1. Press button
. The symbol
hours and minutes become -00:01, which is the time re-
maining before the end of the Holiday function.
2. Press buttons
and
to extend the time remaining un-
til the end of the Holiday function in 1 hour increments
(-00:01 means 1 hour; -45:00 means 45 days). By keep-
ing the button pressed the time and days will change rap-
idly.
3. During the Holiday function the display will continue to
show the time remaining until the end of the function.
To turn off Holiday function press the button .
starts flashing and the
- 19 -
EN
Publicidad
