universalblue UVT1343-23 Manual De Instrucciones página 17

Thank you for deciding to purchase a
UNIVERSALBLUE product.
We recommend you to spend some time
to read this Instruction Manual in order to
fully understand how to use it correctly..
Please, consider that this appliance is for
domestic use only.
You can visit our YouTube channel to
check the explanatory videos about the
Wi-Fi connection and the App control.
PAIRING YOUR DEVICE
Follow these steps to pair your device with
the WiFi network (image (sequence) 02 on
page 5):
Download the management app:
This product can be used with Tuya Smart
app and also with Smart Life app. The
installation process and the operation are
the same for both apps, we are going to
explain the Tuya Smart process. You can
find two QR download codes in the images
section (pic. 1)
• Download the Tuya Smart application
from the iOS App Store or Android Play
Store in your smartphone; or scan the
QR code shown on Pic. 1.
• Open the Tuya Smart application. If
you don´t have an account, you must
register, or sign in using the SMS
verification. (Pic. 2 y 3)
Pair your fan with the Wi-Fi network:
Image 01 on page 4.
Depending on the fan model, follow these
steps to connect your fan to the WiFi
network:
• Vento Models (Pic. 1)
• Step 01-A and B: Turn the fan on (A)
and press the ON/OFF button within
10 seconds (B)
• Step 02-C: Keep the button pressed
for 2-5 seconds, until you hear a
"beep" (C)
• After you hear the "beep" sound your
fan will be linked to te WiFi network.
• Tramontana Models (Pic.2)
• Step 01- A and B: Turn the fan on (A)
and press the "Fan ON/OFF" button
within 10 seconds (B)
• Step 02- C: Keep the button pressed
for 2-5 seconds, until you hear a
"beep" (C)
• After you hear the "beep" sound your
fan will be linked to te WiFi network.
Pair your fan with the app:
Once you have started your device in
WiFi mode and after you have registered /
logged in into the app you have to add the
device to the app. To do this:
• Open the Tuya Smart application and
tap on the icon "+" on the top right
corner, or tap "add device", in the centre
of the screen. (Fig. 4).
• Go to the device selection menu, and
select "Fan" within the "personal
appliances" section (Fig.5).
• Select you WiFi network (it must be 2.4
Ghz) and enter your password. (Fig.6)
• After tapping on it, select "fast flashing"
mode (1 time/0,5 seconds).(Fig.7 y 8)
• The device will start the pairing process
and will connect to the app. (Fig.9)
• Once the product has been successfully
connected it will show on the main
page. Tap on it to access the control
panel of the device. (Fig.10)
Note: Images are for reference only. The
App might have been updated.
Note: The closer you are to the router, the
better connection you will have to pair the
device.
OPERATION
This app is very easy to use and does not
require big expertise. However, we advise
to get familiar with the instructions
detailed below.
Once you have connected your device, the
EN
17