Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
app will be able to perform the following
adjustments and controls:
• Turn on and then turn off the fan.
• Select the speed.
• Select the airflow mode.
• Add a timer (up to 8 hours)
• Choose
between
Summer mode
• Turn on and then turn off the light.
• Select a pre-set light colour.
• Adjust the colour temperature of the
light
• Select the light brightness
• Program the fan (Weekly Programming)
Note: You can control the appliance with
the App or with the control panel on the
product itself, but not with both.
Screen:
When you enter the main control page
you will find the following functions (see
picture 03 on page 8):
1. Product edit: Tap to change the name
of your device.
2. Display: Quick overview of the fan
status. You can see if it is connected
or disconnected, if the light is on, or
check the fan speed.
3. Switch: Tap to turn the fan on or off.
4. Airflow speed: Select the fan speed
(1-6 speeds)
5. Pre-set airflow modes:
• Natural
• Sleep
• Fresh
• Automatic
6. Timer (TimedShutdown):
• Cancel: No timer
• Sliding control to set the timer
between 1 and 8 hours.
7. Fan
direction:
mode) or Reverse (winter mode)
8. Light: tap to turn the light on or off.
• 8.1 Light settings (Dimmer) (Pic. 8.1).
This option will only be displayed if
the light is turned on
9. Cycle timer (Pic. 9.1): Weekly timer
18
Winter
mode
or
Forward
(summer
Light settings (dimmer):
Pic. 8.1 on page 9.
You can adjust the light settings on this
screen.
• You
can
select
preconfigured light colours:
• Neutral
• Warm
• Cold
• Sleep mode
• Or use the sliding control to select your
preferred colour temperature.
• You can also adjust the brightness
using the sliding control at the bottom.
Weekly Programming
Pic. 9.1 on page 9.
This mode is only available in the APP.
• Enter the control panel of the device
and tap on "cycle timer".
• A button to add a program will show up.
Tap on it.
• Here you will be able to pick the days
and times in which you would like the
program to repeat (the command might
be switching on or off the appliance).
(Fig. 9.1)
Note: When you turn the appliance on,
the last mode set before turning it off will
activate by default.
• You can also add comments and
activate or deactivate an execution
notice.
• You can save several programs and
activate, deactivate or change them
whenever you want.
To set the power-on and power-off time
you must add a schedule with the action
"ON" and pick a power-on time, and add a
schedule with the action "OFF" and pick a
power-off time
For example, if you want the device to turn
on Mondays, Wednesdays and Fridays at
8:00 and to turn off at 10:00, you would have
to follow this sequence:
• Turn ON
• Tap on "Add program".
among
the
(Cycle timer):
4
Publicidad
