Descargar Imprimir esta página

Lifetime Air 871125219620 Manual De Instrucciones página 4

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53
STRUCTURE
1. Guard
2. Fan blades
3. Oscillation knob
4. Motor
5. Switch box
6. Slider switch
7. Switch box set screw
8. Cord
9. Inner pipe
10. Outer pipe
11. Base cap
12. Cross-foot base
13. Height adjustment
knob
ASSEMBLY
1. Place the cross-foot base on a stable and level surface.
(figure 1)
2. Remove the screws and fasten the outer pipe (10) with the
screws on the cross-foot base. (figure 2)
3. Attach the base cap (11) to the outer pipe. (figure 2)
4. Release the inner pipe (9) and choose the correct height.
Fasten the height adjustment knob (13) to set the correct
height
5. Attach the motor housing (4) to the inner pipe (9) by
tightening the switch box set screw (7)
6. Turn the cage closure and blade fastener on the front of
the motor by turning it counter clockwise.(figure 4)
7. Place the back cage on the front of the motor with the
lever at the top, so that the motor adjustment pins are
correctly positioned in the holes of the cage. (figure 5
8. Screw the cage closure onto the thread protruding from
the front of the motor by turning it clockwise.(figure 6)
9. Push the fan blade onto the motor shaft. Then tighten the
blade fastener. (figure 7)
10. Place the logo plate on the front cage and fasten the logo
plate by placing the white screw

Publicidad

loading