Publicidad
Idiomas disponibles
Idiomas disponibles
English
- This equipment is designed and intended
for home and consumer use only, not for
commercial use.
Warning:
Before beginning any exercise program, consult
your physician. This is especially important for
individuals over the age of 35 or persons with
pre-existing health problems.
Read all instructions before using any fitness
equipment.
Tunturi New fitness bv. assumes no
responsibility for personal injury or property
damage sustained by or through the use of this
product.
Save these instructions!
Important assembly information
Before you start
We recommend to use two adjustable wrenches
to assemble your product. If you have metric sized
wrenches in correct size this is fine too.
‼
NOTE
• Suitable (adjustable) wrenches are "NOT"
provided with the product, neither included
in the assembly kit.
• It is strongly recommended that this
equipment is assembled by two or more
people to avoid possible injury.
Description illustration A
The illustration shows what the trainer will looks
like after the assembly is completed.
You can use this as a reference during your
assembly, but do follow the assembly steps
always in the correct sequence as showed in the
illustrations.
14
Description illustration B
The illustration shows what components and parts
you should find when un-boxing your product.
‼
NOTE
• Small parts can be hidden/ packed in hollow
spaces in the Styrofoam product protection
• If a part is missing, contact your dealer.
Description illustration C
The illustration shows the hardware kit that comes
with your product.
The hardware kit contains bolts, washers, screws,
nuts etc. and the required tools to properly fit
your trainer.
Description illustration D
The illustrations shows you in the correct following
order how to assembly your trainer best.
‼
NOTE
• Part numbers shown in the assembly steps
are commencing with the spare part drawing
that can be found in the online full version
user manual.
⚠
WARNING
• Assemble the equipment in the given order.
• Carry and move the equipment with at least
two persons.
⚠
CAUTION
• Place the equipment on a firm, level surface.
• Place the equipment on a protective base to
prevent damage to the floor surface.
• Refer to the illustrations for the correct
assembly of the equipment.
Publicidad
