tion for the attachment comb for use.
Note: Keep the attachment combs in a safe place when not in use so
that they do not get lost.
6. Maintenance
6.1. HEPA filter & foam filter maintenance
1. Remove the collection container and then remove the HEPA and foam
filters.
2. Wash with tap water and drain the water after washing.
10
3. Place in a well-ventilated place for at least 24 hours and allow to dry
sufficiently.
4. Reinstall the HEPA and foam filters only after they are completely
dry. Be sure to reinstall both HEPA filter and foam filter before using the
appliance.
Note: Clean HEPA filter and foam filter regularly, depending on the
frequency of use and the degree of soiling. Before cleaning, always dis-
connect the appliance from the power supply and pull the plug out of
the mains socket. Only install the HEPA filter and the foam filter after
they have dried completely, otherwise an electric shock and product
failure may occur.
6.2. Maintaining the collection container
1. Gently lift the collection container in the direction of the arrow and
remove it.
24
18
6
12
24
18
6
12
x
x