Publicidad
Idiomas disponibles
Idiomas disponibles
1. On/Off switch
Press the button to switch the air conditioner on or off.
2. Speed button
Press the button to select the high/medium/low speed.
3. Temperature/time setting button
Press it in cooling mode to increase/decrease the set
temperature. Press it in time mode to adjust the on/off time.
Press the "High" and "Low" buttons simultaneously to switch
between Fahrenheit and degrees Celsius.
4. Mode button
Press the button to select between cooling, ventilation, drying
and heating.
5. Timer button
Press the key in standby mode to set the switch-on time. Press this key in on mode to set the
switch-off time.
6. Temperature/time display window
This window shows the set temperature and time.
7. Pan key
Press the key for the swivel function.
8. Temperature Shift key
The key is used to switch between °C and °F.
COMMISSIONING
PREPARATION FOR USE
Leave the appliance upright for at least 2 hours before operating it for the first time and make sure that
•
With a properly earthed socket, place the unit on a level surface near the window.
•
The distance to walls or other objects must be at least 50 cm.
•
Before using the unit, make sure that both air inlet and air outlet are free of obstructions and not
blocked.
•
Observe the instructions in the chapter "Important information on safety, location and electrical
connection".
IMPORTANT!
the condensation water outlet is well closed.
134
Publicidad
