Electrolux EFD6DE18S Manual De Instrucciones página 10

The set temperature will be reached
within 24 hours.
After a power failure the set temperature
remains stored.
4.5 FastCool function
If you need to insert in the fridge
compartment a large amount of warm food,
for example after doing the grocery shopping,
we suggest activating the FastCool function
to chill the products more rapidly and to avoid
warming the other food which is already in
the refrigerator.
1. Press the Mode until the corresponding
icon appears.
The FastCool indicator flashes.
2. Press the OK to confirm.
The FastCool indicator is shown. When the
FastCool function is on, the fan may work
automatically.
This function stops automatically after
approximately 6 hours.
You can deactivate the FastCool function
before its automatic end by repeating the
procedure or by selecting a different fridge
set temperature.
4.6 FastFreeze function
The FastFreeze function is used to pre-freeze
and fast freeze in sequence in the freezer
compartment. This function accelerates the
freezing of fresh food and, at the same time,
protects foodstuffs already stored from
undesirable warming.
To freeze fresh food activate the
FastFreeze function at least 24 hours
before placing the food to complete pre-
freezing.
1. To activate this function press the Mode
button until the corresponding icon
appears.
The FastFreeze indicator flashes.
2. Press the OK button to confirm.
The FastFreeze indicator is shown.
10 ENGLISH
This function stops automatically after 52
hours.
You can deactivate the FastFreeze function
before its automatic end by repeating the
procedure until the FastFreeze indicator turns
off or by selecting a different set temperature.
4.7 DYNAMICAIR function
The refrigerator compartment is equipped
with a device that allows rapid cooling of food
and keeps more uniform temperature in the
compartment.
This device activates automatically when
needed or manually.
To switch on the function:
1. Press the Mode button until the
corresponding icon appears.
The DYNAMICAIR indicator flashes.
2. Press the OK button to confirm.
The DYNAMICAIR indicator is shown.
To switch off the function repeat the
procedure until the DYNAMICAIR indicator
turns off.
If the function is activated automatically
the DYNAMICAIR indicator is not shown
(refer to "DYNAMICAIR" section in "Daily
use").
The activation of the DYNAMICAIR
function increase the energy
consumption.
The fan operates only when the door is
closed.
4.8 ChildLock function
Activate the ChildLock function to lock the
buttons from unintentional operation.
1. Press Mode until the corresponding icon
appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock function, repeat
the procedure until the ChildLock indicator
turns off.