Publicidad
Idiomas disponibles
Idiomas disponibles
Individuals who have not read the instruction manual and
are not familiarized with how to operate the compressor
must not use it.
To ensure that you work with the compressor safely, you
should consider a few precautions and procedures before
start-up:
▪ Check if the compressor and attachable accessories are
assembled correctly and in good condition. If there is
damage or excessive wear, replace the parts and
accessories. Never use parts or accessories that are
damaged;
▪ Check for misalignments, blockages, or damage to
moving/rotating parts, or any other condition that could
affect the operation of the compressor. All moving parts
should rotate smoothly, without abnormal noise;
▪ Make sure the switch is off when you plug in the power
cord. If the "ON/OFF" switch is damaged or does not
allow the operation of the compressor to be controlled,
it must be repaired or replaced to prevent any
unintentional start. Never use the equipment where the
switch cannot be turned on and off;
▪ Remove any adjusting key or wrench before turning the
compressor on. A wrench or a key left attached to a
rotating part of the compressor may result in personal
injury;
▪ Make sure the safety devices are in perfect condition and
function correctly. Never operate the air compressor if
the safety devices are missing, inhibited, damaged or
worn out;
▪ Safety devices and damaged parts must be repaired or
replaced in a service center.
Make all adjustments and work necessary for the correct
assembly of the compressor if you have any questions or
difficulties, contact your official dealer.
Keep third parties away from the compressor's area of
operation. Never work while animals or people,
especially children, are in the danger zone.
Keep the work area clean, organized and well lit (brightness
between 250 to 300 lux), thus decreasing the risk of
accidents.
Always wear personal protective equipment and clothing.
Wearing a protective visor or goggles, dust mask, hearing
protection, anti-slip safety shoes, long-sleeved clothing,
gloves, and helmet properly reduces the risk of injury.
Everyone coming into the working area must wear personal
protective equipment. Objects can fly off while the
compressor is running and accidently harm whoever is
nearby.
Clothing worn during the operation of the compressor must
be adequate, tight and closed, for example, a work boiler
suit. Do not wear loose clothing or jewelry. Keep hair,
clothing, and gloves away from moving parts.
The control and safety devices installed must not be
removed or inhibited.
Always keep the rotating parts guards in place.
Make sure that the ventilation slots are not clogged. Do not
place any objects over the ventilation slots.
During the operation of the compressor, some parts and
accessories reach high temperatures. To avoid burns, do
not touch these elements.
Publicidad
