Descargar Imprimir esta página

GRLLR Prime G4 Manual De Ensamblaje página 15

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
plastic
spatula.
4. Finally, brush off the dirt using a brass cleaning brush intended for grills.
5. If you wish, you can also wash the flame tamers in a sink using mild dishwashing liquid.
6. Dry the flame tamers and place them back into the grill.
Other grill components
Chloride and salt may cause the grill to rust. If the grill is being used in the immediate
vicinity of seawater or a pool, the grill must be cleaned after every use.
In addition to the components mentioned above, the grill also has many other steel parts that
need to be cleaned regularly. You can follow the general instructions below for cleaning such
components:
1. Clean the steel parts of the grill with grill cleaning fluid, stainless steel cleaning liquid or
mild dishwashing liquid and a cloth.
2. Do not forget to dry the cleaned parts carefully.
3. Do not use detergents for cleaning the control panels and the surfaces with warning
labels, as
they may remove the text or other labels.
4. Clean all of the grill's outer surfaces at least three times a year so that stains do not stick
to the
surfaces.
5. Always test the suitability of a new detergent on an unnoticeable spot.
Storage
Check these instructions if you stop using the grill for a longer time or you wish to put the grill
into storage for the winter, for example. Proper storage prolongs the grill's service life and
keeps it operational for many years. When storing the grill, follow the instructions below:
1. Clean the grill completely according to the instructions in the manual.
2. Turn the grill on and let it warm up for 15 minutes so that all steel parts dry off.
3. Let the grill cool down.
4. Ensure that all grill grids are greased.
5. If storing the grill outdoors, remove the burners, grids, heating grid and heat distributor
plates
from the grill. These parts need to be stored in a dry and warm space. It is also
recommended
that you wrap these parts into newspapers or similar so that the surfaces do not get
scratched.
6. Remove the low-pressure regulator from the gas cylinder.
7. Always store the gas cylinder outdoors and ensure that it is not exposed to heat or
sunlight.
8. If the grill is stored outdoors, it is recommended that you purchase a high-quality cover for
it that
covers it all the way down. Ensure that air can circulate even under the cover.
15

Publicidad

loading