cecotec ROCKNGRILL 1500 RAPID Manual De Instrucciones página 28

ENGLISH
3. OPERATION
1. Plug the product to a power supply. The light indicator will turn on, indicating the device
has started preheating.
2. It will take approximately 3 minutes for the device to reach the optimum operating
temperature. The light indicator will turn off when temperature is ready.
3. Open the grill and place the sandwich, meat, or any other food to be cooked on the bottom
plate.
4. Close the grill and cook food from 3 to 8 minutes until ready.
5. When food is cooked, use the handle to open the grill and use a heatproof spatula to
remove food.
6. Once you have finished cooking, unplug the device and leave it open until it cools down.
WARNING
Never use metal tongs or a knife to remove food, as these can cause damage to the non-stick
coating.
4. CLEANING AND MAINTENANCE
- Always unplug the device after each use and before cleaning.
- Allow the appliance to cool down before cleaning and storing.
- If there is food stuck to the plates, pour some drops of soapy water to soften the food
remains, then use a non-abrasive sponge or paper towel to remove them.
- Use a soft, damp cloth to clean the outside surface of the product.
- Do not immerse the device in water or other liquids.
- Do not use abrasive cleaners or scouring pads to clean the product.
- Do not wash the device in the dishwasher.
- Remove and empty the grease-collection tray after each use and wash the tray in warm,
soapy water. Rinse and dry thoroughly with a clean, soft cloth and put it back in place.
Storage
- Unplug the device.
- Make sure the grill has cooled down before storing it.
- The power cord can be wrapped around the bottom of the base for better storage.
5. TECHNICAL SPECIFICATIONS
Product: Rock'nGrill 1500 Rapid
Product reference: 03065
28 ROCKNGRILL 1500 RAPID