Publicidad
Idiomas disponibles
Idiomas disponibles
3.Folding and Assembly Procedure
ALL FIXTURES SHOULD BE CHECKED ON A REGULAR BASIS TO ENSURE THEY ARE SUFFICIENTLY
TIGHTENED.
4.Charging the scooter
1.Only use the supplied and dedicated charger.
2.Open the charging port rubber cover on the footplate and insert the
charger output connector into the charging hole.
3.Plug the charger into the power socket supply.
4.The charger indicator is red, indicating that it is charging. When the
charger indicator shows green, the battery isfully charged.
5. When the battery is fully charged unplug the charger from the mains
power supply and from the scooter, then close the charging port
rubber cover. Do not charge overnight
6.The electric kids scooter is ready to use.
5
Publicidad
