Geutebruck G-ST 8000+G3 Manual De Instalación página 39

General safety instructions
When using the devices or performing maintenance on them, the following safety instruc-
tions are to be observed to protect the operator, the service technician and the device:


Nonetheless, we are obligated to describe these safety instructions so that the residual
dangers can be eliminated.
Warning!
When electric machines are used, fundamental safety precautions must be observed to
eliminate the risk of fire, electric shock and injury to persons. For this reason, please read
these operating instructions before starting your work. Store these instructions in a place
where the qualified personnel and user can access them quickly and easily.
When operating the device, the locally applicable laws, regulations and standards must
be observed. In the interest of safety, the operating company and supervisors are respon-
sible for compliance.
Whenever performing any kind of work, check for any possible damage. All parts must be
mounted correctly and all conditions fulfilled to ensure proper functioning.
If the device is damaged in any way, it may no longer be used. Ensure that the devices
are repaired properly. Mark the defect clearly and pull the power plug so that no acci-
dents or damage can occur before the device is repaired.
Do not use the power line for uses for which it is not intended. Protect the cable from
heat, oil and sharp edges.
In dangerous situations or technical malfunctions, disconnect the device from the power
supply immediately.
Warning of electric energy!
In case of damage, the device may no longer be used. Disconnect the device from the
power supply!
Warning!
For all repair and maintenance work, the device must be disconnected from the power
supply. Work on electrical equipment may only be performed by qualified electricians.
Only original parts may be used. Otherwise, the user is subject to danger of accident.
Warning!
The use of parts and related accessories other than those specified in these operating in-
structions can lead to injury. Only use replacement parts approved by the manufacturer!
Caution!
Risk of explosion if mainboard battery is replaced by an incorrect type.
Dispose of batteries in accordance with local laws and regulations!
During design and construction of the devices, the acknowledged state of the art as
well as the acknowledged applicable standards and directives have been taken into
account and implemented.
Additionally, the devices have been designed and developed so that the danger that
occurs during intended use has been eliminated to the greatest possible extent.
5
Back to the
table of contents
~