Geutebruck G-ST 8000+G3 Manual De Instalación página 46

Rear side
Figure: Rear view G-ST 8000+G3
1
2
3
4
5
6
7
8
The position of the connections may vary!
Please check the accompanying mainboard manual if the configuration is different.
When using an analog monitor you need a DisplayPort to VGA adapter (Art. No.: 5.39401).
Redundant power-supply units.
Display Port outputs for connecting a PC monitor.
3x Ethernet ports 10/100/1000 MBit/s base-TX iAMT interface and
10/100/1000/2500 MBit/s base-TX interface
4x USB 3.2 (Gen1), 2x USB 3.2 (Gen2)
Serial RS-232 interface (9-pin sub-D connector)
USB-C 3.2 (Gen2)
Sound card ports.
Control inputs for connecting external contacts for event-controlled
image recording / relay outputs
12
Back to the
table of contents
~