Publicidad
Idiomas disponibles
Idiomas disponibles
2. . TECHNICAL FEATURES
Part Nr :
BDD-5
0 0 0 0
2.1 ELECTRIC PUMP WITH
- Useful oil capacity:........................
- Oil flow at 700 bar: ........................
- Oil flow at low pressure: ...............
- - M tor: ..........................................
- Power: .......................................
- Voltage: .......................................
- Valve ways/Positions: ..................
2.2 DESCRIPTION.
The electrical pump consists of the following principal parts:
Electric motor with corresponding coupling.
•
Hydraulic piston pump with filter.
•
Transportation plug and ventilation plug (plastic bag), except from 100 litters tank
•
models.
Pressure meter connection, except from 2,5 and 5 litters tank models.
•
Electrical cabinet or motor circuit breaker box.
•
Manual distributing valve or electro valve with 3/8 NPT outputs.
•
Internal safety valve adjusted to 700 bar .
•
Adjustable external pressure regulating valve: 0-700 bar.
•
3. . INSTALLATION
3.1 INSTALLATION
Read the instructions manual thoroughly and apply the contents.
Make sure that the machine has not been damaged during transportation and is both clean and complete.
Position the machine is a stable, well-protected area.
Use hoses that are long enough to make sure the operator is well away from the danger zone.
Assemble the complete installation making sure that all accessories (hoses, quick-plugs, valves, joints, pressure meters,
distributors, cylinders, etc.) are properly connected. Check without a load as indicated in the next point. A good installation is
essential to the proper, risk-free functioning of the machine, and should therefore be carried out by qualified personnel only.
o
MANUAL VALVE
5 lit.
0,36 l/min
4 l/min
Electric
0,75 Kw
400 V. 50/60 Hz. 3 ph.
Manual
4/3 Double Acting Advance/Hold/Retract
7
Publicidad
