Grundig Sh 10 Manual Del Usuario página 25

Care and Maintenance
The housing should only be cleaned with a soft
cloth which picks up dust. Polishing or cleaning
agents may damage the surface.
Parts contacting the tape should be checked from
time to time for contamination by tape abrasion,
see illustration at the end of this booklet.
If cleaning should be necessary, use a cotton
wrapround soaked in cleaning benzine.
Never use a metallic or other hard object!
– Remove the steno-cassette from the cassette
compartment.
– Switch on device: " DICTATE" - " START".
Warning signal because there is no steno-cas-
sette in the cassette compartment! The device
switches off.
– Press one of the two bolts A in direction of the
cassette compartment.
– Clean the tape-contacting parts: Rubber pinch
roller B, capstan C, sound head D, and erase
head E.
In the event of malfunctions, contact your
specialised dealer.
Subject to technical alterations and alterations
in styling. E. and O.E.
0