Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
performing any assembly or adjustments, or
changing accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
TO ATTACH/DETACH BATTERY PACK (FIG. 2)
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves in the tool, and then slide the battery
pack onto the tool.
When placing the battery pack
NOTICE
onto the tool, be sure that the
raised rib on the battery pack aligns with the
groove inside the tool and that the latches snap
into place properly. Improper attachment of the
battery pack can cause damage to internal
components.
To detach the battery pack:
Depress battery-release button located on the
front of the battery pack to release the battery
pack. Pull the battery pack out and remove it
from the tool.
TO INSTALL/REMOVE BELT CLIP (FIG. 3)
Your tool is shipped with a removable belt clip
that can be positioned on either side of the tool.
The belt clip can be used to hang the tool on a
belt.
To install the belt clip:
a. Remove the battery pack from the tool.
b. Align the two pins of the belt clip with the
holes on the base of the tool.
c. Insert the screw and securely tighten the
screw with a Phillips screwdriver (not
included).
To remove the belt clip:
a. Remove the battery pack from the tool.
b. Use a screwdriver to loosen the screw that
attaches the belt clip to the tool.
c. Remove the screw and the belt clip.
Detach the battery pack
from the tool before
ASSEMBLY
Fig. 2
WARNING
accessories not recommended for use with
this tool. Any such alteration or modification is
misuse and could result in a hazardous
condition leading to possible serious injury.
Fig. 3
-10-
Battery-Release
Attach
Button
Do not attempt to modify
this tool or create
Detach
Publicidad
