Flex FX4521 Manual Del Operador página 16

PRE-POSITIONING (FIG. 11)
Pipes and wires pre-positioning:
The front end of the workpiece contact is
equipped with an arched groove, which can pre-
position pipes and wires with a diameters under
13/64" (5mm).
Cloth and soft material pre-positioning:
There is a lock piece with three triangular teeth
next to the workpiece contact, which can be
manually flipped and installed. The teeth of
the lock piece can pre-position cloth and soft
materials on the fixed workpiece.
When the workpiece is made of
NOTICE
hard material, the teeth of the lock
piece will prevent the tool from properly fitting
the workpiece surface. Flip the lock piece 180°
to the storage position (Fig. 12).
Fig. 11
Arched Groove
-16-
Workpiece Contact
Lock
piece