Publicidad
Idiomas disponibles
Idiomas disponibles
Handle the staples and their box carefully. If the
staples have been handled roughly, they may
be bent out of shape, causing poor staple feed
or jamming.
Avoid storing the staples in a very humid or hot
place, or exposed to direct sunlight.
TO LOAD OR REMOVE STAPLES
(FIG. 4a & 4b)
WARNING
loading or removing staples. Failure to do so
could result in serious personal injury.
WARNING
others when loading staples. Failure to do so
could result in possible serious personal injury.
WARNING
this tool. The use of any other staples can
result in tool malfunction, leading to serious
injuries.
WARNING
trigger activated. Doing so could result in
possible serious personal injury.
To load staples:
a. Remove the battery pack from the tool.
b. With the nose of the tool pointed away from
you or other person, press the locking lever
on the rear of the magazine and slide the
magazine backward.
c. Load the staples into the magazine slot with
their feet facing up.
d. Slide the magazine forward.
e. To secure the magazine in place, hook the
locking lever on the rear of the magazine
To remove staples:
a. Remove the battery pack from the tool.
b. Press the locking lever and slide the
magazine backward.
c. Take out staples from the magazine slot.
d. Slide the magazine forward.
e. To secure the magazine in place, hook the
locking lever on the rear of the magazine.
STAPLES
Remove the battery pack
from the tool before
Keep the tool pointed
away from yourself and
Use only the staples
recommended for use with
Never load staples with
the workpiece contact or
WARNING
manual. Do not use staples that appear to be
damaged, bent, rusty, or corroded.
WARNING
time inside the magazine. This will cause poor
staple feed or jamming.
Fig. 4a
3
Fig. 4b
-11-
Do not use staples other
than designated in this
Do not insert staples of
different sizes at the same
Staples
Slot
Magazine
Magazine
Locking Lever
Staples
3
Magazine
Slot
Magazine
Locking Lever
2
1
2
1
Publicidad
