Youin BK1300 Manual De Usuario página 22

8. LCD Display
· Switching the Lighting ON/OFF
Long press the UP button for more than 1 second to turn on the headlights, the
instrument display shows the headlight symbol, and the brightness of the display
backlight decreases. Press and hold the UP button here for more than 1 second to
turn off the headlights, the headlight symbol on the instrument display disappears,
and the backlight brightness is restored.
Switching Lighting on/off
· Assist Level Selection
The assist level of the E-bike drive can be changed
anytime, even during riding.
The assist level ranges from 0 to 5 (level 0 to level
5). The default assist level is "1" when the display is
started. The output power is zero on Level "0". Level
"1" is the minimum output power. Level "5" is the
maximum output power.
Press UP/DOWN button to switch between the E-bike system assist levels and
change the motor output power.
· Battery Indication
The five battery power bars represent the capacity of the battery. The five battery
bars are bright when the battery is in full voltage. When the battery is in low voltage,
battery frame will flash at the frequency of 1HZ to give a notice that the battery needs
to be recharged immediately
Flash (low voltage)
Battery display
· Error Code Indication
The components of the E-bike system are
continuously and automatically monitored. When
an error is detected, the respective error code is
indicated in text indication area. Refer to detailed
definition of the error codes in Attached list 1.
22
YOU-RIDE BARCELONA