Publicidad
Idiomas disponibles
Idiomas disponibles
8. LCD Display
Have the display inspected and repaired when an error code appears. Or else, you
will not be able to ride the bike normally. Please always refer to an authorized bicycle
dealer.
8.4 General Setting
· Wheel diameter settings
d1A refers to wheel size settings. Settable values are
12,14,16,18,20,22,24,26, 700C,28,29. Press UP/DOWN to
choose the correct wheel size to ensure the correctness
of speed and mileage indication. The default value is 20
inch. Press on/off button to access speed limit setting
interface.
· Controller software version
CLS refers to controller software version number. The
version number is reported by the controller. It can not
be adjusted from display side
· Display software version
DPS refers to display software version number. The
display software version is not adjustable. It is decided
by the software.
· Unit exchange
U refers to unit. 1 is metric and 0 is imperial. Press UP/DOWN to change the unit for
speed and mileage. Press ON/OFF button to confirm. The default unit is metric (km/h
and km)
23
ENGLISH
Publicidad
