Youin BK1300 Manual De Usuario página 24

8. LCD Display
· Brightness
bLG refers to Backlight level settings. The settable range is 1 2 3 4 5. 1 is the darkest, 3
is standard and 5 is the brightest. The default value is decided by the controller when
the display leaves factory. Press UP/DOWN to change the brightness levels. Hold the
on/off button to confirm and exit the settings.
· Maximum speed limits
SPd refers to top speed limit settings, the settable
range is 5 to 25 km/h. The top speed on the display
is reported by the controller. Press UP/DOWN to
increase or decrease the numbers to your desired
value. Hold the ON/OFF buttons 1 seconds to
confirm and exit the settings.
· Push assistant speed settings
PSH refers to push assistant speed settings.
The settable range is 3km/h to 6km/h. Press UP/
DOWN to increase or decrease the speed limit to
your desired value. Hold the ON/OFF button 1s to
confirm and exit the settings status.
· TRIP Clear Function
In TRIP mode and Trip is not 0, press the UP and DOWN buttons at the same time for
more than 1 second to clear the trip data information.
· Exit Setting
In personalized parameter setting interface, short press Switch button to confirm the
input. Press and hold ON/OFF button to save the settings and exit the current setting.
24
YOU-RIDE BARCELONA