Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
4. Consult the dealer or an experienced radio/TV technician
for help
5. Changes or modifications not approved by the party
responsible for FCC and Industry Canada compliance
could void the user's authority to operate the equipment.
This appliance complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1. This device may not cause interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
This device complies with Canadian CAN ICES-003(B)/NMB-
003(B)
SUPPLIER'S DECLARATION OF CONFORMITY
47 CFR § 2.1077 Compliance Information
Unique Identifier:
Danby, RG51F(2)/EF, RG51F(2)/EF-B
Responsible Party U.S. Contact Information:
Danby Products Inc.
1800 Production Drive
Findlay, OH
45840
Telephone number or internet contact information: Danby.
com
FCC Compliance Statement:
This appliance complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1. This device may not cause interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
TIMER
Auto Off
1. When the air conditioner is turned on, press the timer
button to activate the auto off timer.
2. Press the temperature control buttons to change the set
time in 0.5 hour increments up to 10 hours and then in 1
hour increments up to 24 hours.
Auto On
1. When the air conditioner is turned off, press the timer
button to activate the auto on timer.
2. Press the temperature control buttons to change the set
time in 0.5 hour increments up to 10 hours and then in 1
hour increments up to 24 hours.
The timer will not cycle the air conditioner on and off
indefinitely. The auto on and auto off timers will function
one time and then the air conditioner will return to regular
operation. When setting the timer, the display will revert
back to showing the temperature if there is no input within 5
seconds.Turn the air conditioner off, set the timer to 0 or press
and hold the timer button for 3 seconds to turn off the timer.
SHORTCUT
Shortcut can be used to save a favourite setting. Set the air
conditioner to the desired temperature and fan speed. Press
and hold the shortcut button for 2 seconds. Press the shortcut
button at any point in future to return to the favourite setting.
Shortcut is only available on the remote control. If no shortcut
is set, pressing the shortcut button will set the air conditioner
to run in auto mode at 29°C (79°F), with fan speed set to auto.
SLEEP
The sleep feature can be used to conserve energy during
sleeping hours. This feature can be used during cool and heat
mode. It is not available in dry or fan mode. The temperature
will increase by 1 degree every 30 minutes for 1 hour. The unit
will hold the new temperature for 7 hours. The sleep feature
can be canceled at any time by pressing the sleep button.
FOLLOW ME
There is a temperature sensor built into the remote control
that will continuously collect the current room temperature.
Keep the remote control with you and the appliance will
automatically adjust the set temperature based on the
current temperature where you are located to reach the most
comfortable condition.
Press the follow me button to activate the feature. The remote
will send a signal to the air conditioner every 3 minutes, so
long as you remain within range of the appliance.
If the appliance does not receive a signal from the remote
during any 7 minute interval, it will beep to indicate that
follow me has ended. The maximum distance for the follow me
feature is 8 meters (26 feet). This feature is available in cool
and auto modes.
15
Publicidad
