Kohler K-14550 Guia De Instalacion página 10

Valve
Stem
Correct handle
alignment.
7. Install Faceplate and Handle
Remove and discard the plaster guard and/or dome, if installed.
Install the faceplate onto the valve. Secure with two screws. Do
not overtighten.
Install the graphics ring to the faceplate, and rotate it clockwise to
lock it in place.
Rotate the valve stem fully counterclockwise.
Slide the sleeve over the valve stem.
Install insert over stem adapter and onto sleeve.
Press bath handle adapter onto stem adapter and secure with
screw.
Thread bath handle onto bath handle adapter. The tabs on the
bath handle must engage the slots inside the handle.
114489-2-BA
Faceplate
Screws
Graphics Ring
Sleeve
Stem Adapter
Insert
Bath Handle Adapter
Handle
10
Tabs
Screw
Kohler Co.