Publicidad
Idiomas disponibles
Idiomas disponibles
Tools and Materials
Pipe
Adjustable
Wrench
Wrench
Assorted
Plumbers
Screwdrivers
Putty
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Before You Begin
CAUTION: Risk of product damage to the K-306-KS valve
assembly. When using this valve in a fiberglass or acrylic
installation, use the Thin Wall Installation Kit (88526).
CAUTION: Risk of product damage. The valve contains plastic
components. Do not apply excessive heat if you solder the valve
connections.
Observe all local plumbing and building codes.
The valve shuts off by water pressure. Do not force the handle in
any direction. To turn the valve off, gently turn it to the "Off"
position.
Flush all piping thoroughly before installing this valve.
Do not use plastic pipe between the valve and the spout. Use
1/2" nominal copper tube or 1/2" iron pipe.
Do not connect a deck-mount spout, diverter, or hand shower to
the spout outlet unless you cap the shower outlet on the valve.
Kohler Co.
Strap
Hacksaw or Tubing Cutter
Wrench
Thread
Hex
Sealant
Wrench
Thermometer
3
Propane
Torch
Solder
114489-2-BA
Publicidad
