Publicidad
Idiomas disponibles
Idiomas disponibles
Names and functions of
indications on wireless remote
controller
Display
All indications, except for clock time indication, are
indicated by pushing the START/STOP
1
3
8
9
6
In the illustration, all indications are indicated for
explanation.
During operation, only the relevant indications will be
indicated on the remote controller.
1
Transmission mark
This transmission mark (
remote controller transmits signals to the indoor unit.
2
Mode display
Indicates the current operation mode.
(A : Auto changeover control,
: Heat,
: Fan only)
3
Temperature display
Indicates the temperature setting (62°F to 86°F
(17°C to 30°C)).
When you set the operating mode to
no temperature setting is indicated.
4
FAN speed display
Indicates the selected fan speed. AUTO or one of
five fan speed levels (LOW
MED
, MED
can be indicated.
Indicates
: Dry.
5
TIMER and clock time display
The time set for timer operation or clock time is
indicated.
The present time is always indicated except for
TIMER operation.
6
Hi POWER display
Indicates when the high power operation starts.
Push the Hi POWER button to start and push it again
to stop the operation.
7
(PRESET) display
Indicated when memorizing the preferred operation
mode or when it has been memorized.
Also, this icon is indicated when the memorized
preferred operation is displayed.
5-EN
1130615205_EN-ES-FR.indb 5
1130615205_EN-ES-FR.indb 5
button.
2
10
7
5
4
) indicates when the
: Cool,
: Dry,
: Fan only,
+
, LOW
,
+
, HIGH
when the operating mode is
8
(COMFORT SLEEP) display
Indicated during the OFF timer operation that
automatically adjusts the room temperature and the
fan speed. Each time you push the COMFORT
SLEEP button, the display changes in the sequence
of 1h, 3h, 5h, and 9h.
9
(QUIET) display
Indicated during the quiet operation.
10
Swing display
Indicated during the swinging operation where the
horizontal louver automatically moves up and down.
NOTE
When both wired remote controller or central controller
and wireless remote controller are used, display on the
screen of wireless remote controller may differ from the
actual operation in some cases.
)
– 5 –
9/8/2565 BE 15:38
9/8/2565 BE 15:38
Publicidad
