Publicidad
Idiomas disponibles
Idiomas disponibles
6 Charging
Charging step tips
Charge port
Open the charge
WARNING
Do not charge if the charge port or charge cable is wet.
Do not charge or use your battery if it is damaged or see trace of water.
Close the charge port cover when not charging.
Your KickScooter is fully charged when the LED on the charger changes from red (charging) to green
(trickle charge).
7 Learning to Ride
Wear an approved helmet and other protective
gear to minimize any possible injury.
08
Insert the
port cover.
charge plug.
1. Power on the KickScooter and check
the power level indicator. Charge the
KickScooter if the battery level is low.
Close the charge
port cover when
finished.
2. Stand on the footrest with one foot
and push off with another foot to
start gliding.
4. Slow down by releasing the throttle; and
brake by squeezing the brake lever.
WARNING
When hard braking, you risk serious injury due to loss of traction and falls.
Maintain a moderate speed and look out for potential hazards.
3. Put your other foot on the footrest to keep
both feet stable. Press the throttle on the right
hand to speed up when you are balanced.
Note, for your safety, the motor will not
engage until the KickScooter reaches
3.1 mph (5 km/h).
5. To turn, shift your body and turn the
handle slightly.
09
Publicidad
