Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Press the button
EN
displays the symbol
4.
Press
and
5.
Press the button
displays the symbol for the minute setting.
6.
Press
and
7.
Press the button
Note: The clock and calendar will be reset to their
default settings if the power supply is cut off.
Heating mode fig.5
1.
Press the button
The chosen heating mode runs in a continuous cycle as it is
shown below:
2.
Comfort mode: Press
temperature from 5-35 oC.
3.
ECO mode: Press
from 1-31 oC.
Note: ECO mode has the same set-up temperature
as the Comfort mode minus 4 oC.
4.
Anti-frost mode. The target temperature is 7 oC.
The temperature can't be adjusted.
5.
Programs P1/P2/P3: Pre-set heating program. Fig. 6
Note: If the clock and day setting are not finished,
the first time to enter P1/P2/P3 program setting, it is
requested to set day and clock setting in advance.
The image below (Figure 1-5) is just for illustration
purposes only and not shown on the LED display.
P1: (Monday-Sunday) Unadjustable program - Figure 6.1
00:00am – 01:00am
01:00am – 07:00am
07:00am – 00:00am
P2:(Monday-Friday) Unadjustable program - Figure 6.2
00:00am – 01:00am
01:00am – 05:00am
05:00am – 09:00am
09:00am – 19:00pm
19:00pm – 00:00am
P2:(Saturday-Sunday) Unadjustable program -Figure 6.3
00:00am – 01:00am
01:00am – 08:00am
08:00am – 11:00am
11:00am – 13:00pm
13:00pm – 16:00pm
16:00pm – 20:00pm
20:00pm – 00:00am
8
Usage and Storage Instructions
to confirm day setting. The screen
for the clock-hour setting.
to set the current hour.
to confirm hour setting. The screen
to set the current minute.
to confirm all settings.
to enter mode selection menu.
and
and
to set the temperature
Comfort mode,
ECO mode and
Comfort mode.
comfort mode,
ECO mode
comfort mode
ECO mode
comfort mode
comfort mode,
ECO mode
comfort mode,
ECO mode
comfort mode,
ECO mode
comfort mode.
P3:(Monday-Friday)
00:00am – 01:00am
01:00am – 05:00am
05:00am –09:00am
09:00am – 12:00pm
12:00pm – 16:00pm
16:00pm – 18:00pm
18:00pm – 00:00am
P3:(Saturday-Sunday) Adjustable program - Figure 6.5
00:00am – 01:00am
01:00am – 05:00am
05:00am –00:00am
to set the
P3 adjustable program setting
•
When under P3 mode, press the button
enter day setting.
•
The screen displays , press
(Monday-Sunday). Press the button
hour setting
•
The screen displays
from (00-23). Press the button
for every hour (Comfort mode(
anti-frost mode (without light indicator))
•
Repeat the operation until you have completed the
schedule of every hour and every day.
Note: After setting heating mode for hour 23,
press
Note: when the screen displays
finish all setting for program P3 .
Timer off function
Press the button
keeps flashing. Keep pressing
– 4h – 8h-0h in a cycle. Or press
from 0-9 hours.
Open window function
To turn on open window function, press together
The screen will display
display the set temperature. When the appliance is heating
up, the detected room temperature drops rapidly over 2
degrees in 2 minutes, the open window function would be
activated, while the screen displays
appliance stops heating.
Press the button
return you to the working mode when the open window
function was activated. The screen stops flashing
can also wait 60 minutes to automatically come back to
previous working mode.
You can press the
window function will be turned off when the appliance is
turned on again.
To turn off open window function, press together
The screen will display
display the set temperature.
Adjustable program - Figure 6.4
comfort mode,
ECO mode
comfort mode,
ECO mode
comfort mode,
ECO mode
comfort mode.
comfort mode,
ECO mode
comfort mode
and
to set from d1 - d7
to confirm and enter
, press
and
to choose heating mode
) or ECO mode (
to come back to day setting.
one time. The screen displays " " and
. The screen will display 2h
and
, after 3 seconds, the screen will
to exit open windows function. This will
to enter the standby mode. The open
, after 3 seconds, the screen will
over 3 secs to
to set the time
) or
, press
to
to set the timer
and
and flashes. The
. You
and
Publicidad
