Pioneer PDV-BT20 Manual De Instrucciones página 5

Attaching/Removing the Battery Pack
Please also read the instruction manual of the player.
Attaching
1
Align the guide of the battery
pack with the guide on the rear
of the player.
2
Push down the front panel of
the player until it clicks.
Make sure that the unit is attached se-
curely to the battery pack by the two
catches.
2
catches
Service Life and Recycling of the Battery Pack
• When the time required for recharging is prolonged or the playback avail-
able time from full recharging to exhaustion becomes extremely short, the
battery pack may have reached the end of service life. (The possible re-
charging count is about 300 times.)
• To save precious resources, do not dispose of an unnecessary battery pack
but bring it to a dealer cooperating with the rechargeable battery recycling
campaign.
Specifications
Battery type
...................... Rechargeable Lithium-Ion
Power requirements
PDV-BT20 ..................... 7.4 V, 2850 mAh
PDV-BT25 ..................... 7.4 V, 6200 mAh
External dimensions
PDV-BT20
.............. 181 (W) x 137 (D) x 8.5 (H) mm
PDV-BT25
............ 181 (W) x 137 (D) x 14.5 (H) mm
Main unit weight
PDV-BT20 ....................................... 260 g
PDV-BT25 ....................................... 500 g
Removing
1
2
1
Operating temperature
Operating humidity
Note
The specifications and design of this
product are subject to change without
notice, due to improvement.
Published by Pioneer Corporation.
Copyright © 2000 Pioneer Corporation.
All rights reserved.
Turn the player power off.
Slide the release switch on the
bottom of the battery pack in
the direction indicated.
Lift the player to remove the battery
pack.
bottom of battery pack
........................................ +5°C to +35°C
................ 5% to 85% (no condensation)
@ RELEASE
¤ RELEASE
5
En