Roborock Flexi Lite Manual Del Usuario página 5

Product Introduction
A
Vacuum Cleaner
A1
—Power
• Press: Start/Pause
• Press and hold for 2 seconds while in
upright and locked position:
Switch off
• Press while charging: Start/
Stop drying
—
Change Mode
• Press: Switch to AUTO/MAX/
ECO mode
—
Self-Clean
• Press while charging: Start/
Stop self-cleaning
• Press and hold for 2 seconds while
charging: Start DEEP mode
—
Voice
• Press: Adjust volume/Turn on or off
• Press and hold for 5s while charging:
Enter language selection mode,
short press to switch languages,
press and hold to select current
language
A1–1—Handle
A1–2—Handle Release
A1–3—Dirty Tank Release
A1–4—Dirty Tank
A1–5—LED Display
A1–6—Clean Tank Release
A1–7—Clean Tank
A1–8—Cleaning Head
A1–9—Roller Cover Release
A1–10—Roller Cover
A1–11—Roller
Screen Functions
A2
A2–1—Dirt Level
A2–2—ECO Mode
A2–3—Charging
A2–4—Battery Level
A2–5—AUTO Mode
A2–6—MAX Mode
A2–7—Error
A2–8—Drying
Charging Dock
A3
A3–1—Charging Contacts
Power Cord
A4
Filter
A5
Maintenance Brush
A6
Product Installation
B
Installing and Removing
B1
the Handle
B1–1— Insert the handle into the vacuum
cleaner until it clicks in place. The
screen should face forward.
B1–2— To remove the handle, hold the
handle firmly and pull it out while
04
inserting a hard object into the hole
on the back of the vacuum body to
press the release button.
Connecting the Charging
B2
Dock
B2–1— Place the charging dock upside
down, connect the power cord into
the bottom of the charging dock, and
store the extra cord inside the power
cord storage slot as required.
Note: Power cord can exit from either side.
B2–2— Place the charging dock on a flat,
hard surface and then plug it into
the socket.
Note: Do not place the charging dock in humid
locations or near any heat sources, such as bathrooms,
kitchens, or radiators.
B2–3— The maintenance brush can be
placed in the groove behind the
charging dock.
Instructions for Use
C
Language Selection
1. Place the vacuum cleaner on the
charging dock and press and hold
for 5 seconds, enter language selection
mode.
2. Press to switch languages. When you
hear the language you want to use, press
and hold for 5 seconds to select the
language.